Electronics Prototype Builder
Same pipeline. Digi-Key/Mouser/KiCad branch.
Track an electronics prototype from netlist through wiring, board source, and tools — without inventing a Digi-Key SKU.
Know how it wires before you power it.
Open local lab127.0.0.1:4431/?lane=electronics · start via Claude launch.json
What it does for you
Branch, not a fork
Same `fab.inventor-pipeline` engine as Prototype Builder. Schematic, wiring steps, board source, and tools checklist are the electronics fields.
Unpriced until real
Digi-Key and Mouser APIs are not wired. Board rows and tools may exist unpriced. BOM stays empty until a live SKU + priceAsOf.
Proving package on disk
Breadboard blinker (RP2040 Pico + LED) is the electronics seed — markdown netlist, not a released KiCad project.
Try it: capabilities
Select a capability — arrow keys move between them, Home/End jump to the ends.
Capability 1 of 6
Schematic / netlist pointer
Same `fab.inventor-pipeline` engine as Prototype Builder. Schematic, wiring steps, board source, and tools checklist are the electronics fields.
Proof, not adjectives
Electronics seed
pkg_breadboard-blink carries schematic, three wiring nets, an unpriced Pico, and a tools checklist.
Lane purity
Mechanical packages cannot carry a schematic. The schema enforces it.
Related tools
Built with Creytix, on Creytix
This page itself was produced by the platform it describes — the same design tokens, module pipeline, and review gates used for every Creytix client site. Nothing here is a mockup of the product; it is the product.